Do I Really Need a Pond Liner?

If you decide to use a Pond Liner, the usual installation method is to dig a hole bigger than your pond size, fill up the hole with a layer of gravel, top it off with paving sand, then finally lay down the liner.

This ensures a layer of protection from sharp stones and other material that might puncture the liner.

A Pond Liner must then be camouflaged with decorative rocks and stones. Some soil, gravel, and water plants will do nicely to hide unsightly liner material at the edges of the pond.

This will give your backyard pond natural appearance that is most desirable to landscape designers and pond owners.

There are many ways to make a backyard pond. The most important and basic concern is how to keep the water in.

To be able to do this, a system of waterproofing is needed. In the garden, aquatic, and pond supply stores, the 2 types of waterproofing material available are:

The flexible PVC, polyethylene, or EPDM rubber type plastic sheeting Pond Liner

The ready-made rigid PVC, fiberglass reinforced plastic, or acrylic butadiene styrene

However, there is a third method for making a backyard pond. This is a more natural method.

It takes a longer time to finish, but then it is a lot less harmful to the environment. It makes use of the nature of clay. If your yard is rich in clay, simply stamp and compact an 8 inch layer into the pond hole.

This will make a natural layer of waterproofing for your pond. One advantage of this method is that it gives you the freedom to do any shape of pond you may think of, and still retain that natural look. As discussed above, it is quite a different matter when using a Pond Liner.

Get a Discount Pond Liner